Link: http://www.kvcindia.com

Laying Out The Site and Building the Foundation
Install temporary power and have electricity hooked up. Lay out site, install batter boards, dig foundation trenches and install the foundation forms. Pour footings, build foundation walls and piers, and install mud sills. Have the foundation inspected.

Setting House Units
Work crews lift components by crane onto the foundation.

Roofing
Install knee boards, collar ties and rafter supports. Install gable end walls, structure wood and supports. Install roof vents. Install roof underlayment and shingles on hinge rows. Install ridge cap shingles.

Dormers
If applicable, cut out roof, install dormer walls, trusses, roof decking, roof edge, tar paper, roll roofing in valleys, install shingles, metal flashing on front wall, install windows and finish trim.

Exterior
Complete installation of exterior siding and trim, soffit and fascia. install windows in gable ends. Paint exterior doors and door jambs. Install shutters and optional exterior storm/security doors. Install landscaping.

Complete Plumbing, Wiring and Utility Hookups
Install any under floor mechanicals, under floor plumbing and electrical fixtures work. Complete electrical hookup throughout home. inspect pipelines below or through the foundation. Provide plumbing connections for water and heater throughout home. Install exterior water faucets. Cut dryer vents through floor and the exterior of the house. Inspection of plumbing and wiring. Provide electrical service from power company. Have electric, gas and water utilities turned on.

Heating and Cooling
Install heating and air conditioning systems. Inspection of heating and air conditioning systems.

Steps, Porches, Decks, Driveways and Sidewalks
Install steps, porches, decks, driveways and sidewalks where applicable.

Interior
Finish interior wall and ceiling drywall repairs and painting. Complete installation of archway and casing. Install stairway walls, drywall, and stair rails to second floor and paint, where applicable. Finish flooring, carpet to carpet splice, carpet to tile splice. Finish installing interior doors and trim. Finish installing light fixures and ceiling fans. Finish installing shower doors, appliances and accessories.

Completion
Clean up site outside and clean inside. Provide grading and seeding of disturbed land areas. Have the final inspection and secure certificate of occupancy. Move in.

Link: http://www.floridahomebuild.com

What is a Modular Built Home?

1.Simply put, a modular building system is a highly engineered method of producing buildings or building components in an efficient and cost effect manner. The use of building systems is common in many different types of residential and commercial construction.

2.Modular Built and site-built homes are constructed to the same building code required by your state, county and specific locality and therefore are not restricted by building or zoning regulations. A quality control process provides 100% assurance that your home has been inspected for code compliance and workmanship. Your new home is inspected at the plant during each phase of construction. Evidence of this inspection is normally shown by the application of a State or inspection agency label of approval.

3. Modular built housing is a fast-growing modern form of construction gaining a growing recognition of its increased efficiency and ability to apply modern technology to the needs of the market place.

4. When you add up all the labor, material and time savings inherent in the systems built process, you will find that the price of your home is generally lower than a traditionally built home of comparable size.

5. Superior quality control, reduced waste and faster completion (30-90 days versus 4-9 months for site-built construction) are primary benefits.

6. The increased efficiency of construction results in greater value for the homeowner. Efficiency begins with modern factory assembly line techniques. Work is never delayed by weather, subcontractor no-shows or missing material. Harmful weather never touches the inside of your home.

Read more »

Link: http://floridahomebuild.com

What is the difference between a modular home and a traditional home?

Modular homes are similar to traditional homes. The same type of building materials and craftsmanship go into building a modular home. However, the way the home is built is the main difference.

In traditional home building, a home is built on the site from the ground up. Many factors determine when the home will be finished, including weather. Modular homes are built in a climate-controlled environment and are then transported to the site for final construction.

This type of construction saves time and money for the home owner, while producing a quality home that will last for years to come.

How are modular homes built?

A modular home can be built from existing plans or generated from your ideas of your “dream home.” There are so many options to choose from. The modular home system uses computer generated plans to meet all national, state, and local building standards.

Framing for a modular home is the same as a traditional home except that modular homes use 20 to 30 percent more material to guarantee a safe trip to the site. Modular homes are built in a climate-controlled environment using the same high quality materials used in traditionally built homes. Quality control is maintained throughout the building process.

Read more »

Link: http://www.kvcindia.com/blog/index.php/homebuilderdeveloper

Modular homes arrangement are built out of boxes, called modules, which are constructed off site, transported to a building lot, and assembled into a finished home. All of the materials - from framing, roofing, and plumbing to cabinetry, interior finish, and electrical - are identical to what you would find in a conventional "stick-built" home. The most striking thing about a modular home is not anything you can see, nor how it is made, but where it is made: in a modern factory designed to build good-quality modular homes.

The Factory Advantage

On the modular factory's assembly line, materials are organized for greatest efficiency and quality control.
The modular factory system combines engineering know-how and factory-production methods to design and build more efficiently and with greater quality control. When done well, the efficiency results in lower costs and the quality control results in a better product. The idea of building homes, especially the components that make up a home, in a factory is not a recent phenomenon. Prefabricated houses have been built in the United States since the 1890s. Americans began buying houses out of mail-order catalogs as soon as it was possible to ship the materials cross-country by railroad. Sears sold about 100,000 mail-order homes from 1908 to 1940. The use of production-line techniques again picked up after World War II and made a sizable contribution to reducing the housing shortage that developed after the war.

Read more »

Link: http://kvcindia.com/blog/index.php/homebuiderdeveloper

Business advantages of Having Modular home arrangements

While material prices for stick builders can vary from one day to the next, modular manufacturers only increase their prices every two to four years. That price stability allows builders to write very accurate estimates. When you send a sec of drawings to a manufacturer, you generally have a firm price within a matter of days. After you enter the costs of site work and finish, you have an accurate cost that isn't subject to unexpected change.

Depending on the manufacturer, the time of year, and the complexity of the plan, the time between placing an order and taking delivery of the completed house is as little as two weeks to as long as several months. But typically it's less than the time it would take you to erect a stick-built unit.

Read more »