HAND DRYER MAINTENANCE
Hand Dryer Elevators Lifts Commercial Industrial air curtain stainless steel heater Manufacturer Insect Killer Pestoflash Special Application
 

passenger dumb waiters freight hospital flame proof lifts
 
Home Profile Products Elevators Air Curtain Insect Killer Hand Dryer Maintenance Feedback Contact
 



Beacon Hand Dryer makes drying hands in public more quick and convenient, and even more sanitary. It's a unique breakthrough that provides clean and economical benefits to public restrooms, commercial food preparation facilities, the washrooms and toilets of offices, retail stores, factories -- virtually any place where people wash their hands. It works by applying a gentle but powerful gust to both sides of the hands. As you slowly pull your hands out of the bin, the "Dual Jet Drying" process literally forces water from both palms and backs of hands in seconds. This hand dryer model is top of the line quality. Manufactured by Beacon Dryer, this washroom accessory is energy conservative and aesthetically pleasing. It is incomparable amongst hand drying manufacturing because of its durability and convenience.

This automatic hand dryer, manufactured and trademarked by Beacon Dryer should be very popular amongst restaurant owners. As well all know, restaurants require the highest standard of sanitation and quality. Patronage to a restaurant can often depend on whether or not customers feel the establishment is clean and provides quality amenities.

The great thing about this hand dryer is that it maintains an automatic sensor that detects when it must turn on. This cuts down on the waste that comes with ordinary push button hand dryers. If you are a restaurant owner, the double benefit of this product is that it does not require any handling of germ carrying fixtures. With no need to touch a button to dry hands or use fibrous paper towels, this hand dryer is a restauranteur's dream. This comes in a recessed model as well that assists in maintaining its durability and appearance.

Construction

1. Its cover shall be a one-piece, heavy-duty, rib-reinforced, die-cast zinc alloy. It shall be lightweight, unbreakable, rustproof and all exposed surfaces shall be bright chrome plated or finished with chip-proof, electrostatically applied epoxy paint and fastened to a wall plate by two chrome plated tamper-proof bolts.

2. Its wall plate shall be equipped with (3) 7/8" (22 mm) diameter holes, one of which shall be suitable for use with surface conduit, for ease of wiring.

3. All internal parts shall be coated according to Underwriters' Laboratories, Inc. requirements.

4. Entire mechanism shall be internally grounded.

Mechanism

1. Its motor shall be a series commutated through-flow discharge vacuum motor/blower (5/8 HP / 20,000 RPM) which provides air velocity of 16,000 LFM (linear feet per minute) at the air outlet and 14,000 LFM at the hands (4 inches [102 mm] below air outlet).

2. Its heating element (900 W) is constructed of Nichrome wire and mounted inside the blower housing, thereby being vandal proof. It shall be protected by an automatic resetting thermostat, which shall open whenever air flow is cut off and shall close when flow of air is resumed. It shall produce an air temperature of up to 135°F (57°C) at a 72°F (22°C) ambient room temperature at the hands (4 inches [102 mm] below air outlet).

--------------------------------------------------------------------------------------------------------------------------------------------

ELEVATORS
¤ Dumb Waiters
¤ Capsule Lifts
¤ Passenger Lifts
¤ Freight Lifts
¤ Automobile / Car lifts
¤ Hospital Lifts
¤ Custom Designed Lifts
¤ Flame Proof Lifts
  
AIR CURTAINS
¤ Domestic
¤ Commercial
¤ Industrial
¤ Special Application
¤ M.S & S.S. Air Curtains
INSECT KILLER/PESTOFLASH
 
Home Profile Products Elevators Air-Curtain Insect Killer Contact Us    Feedback    Home

Best Viewed 800 x 600, Resolution, I.E. 5+